TV wires hanging down the wall, want to hide the TV wires behind a baseboard? Hiding wires behind a baseboard isn’t just about looks.
Have you ever looked at your TV setup and cringed at the tangled mess of wires? You’re not alone, studies show that 72% of homeowners hate visible cables. The good news?
It’s about safety, organization, and making your space feel clean. No more tripping hazards. No more eyesore. Just a sleek, pro-level setup without spending a fortune.
And the best part?
You don’t need fancy tools or an electrician. If you want a clean, professional setup, hiding wires behind a baseboard is the way to go.
It’s cheap, easy, and keeps your living space looking sharp.
Here’s exactly how to do it.
This guide breaks it down step by step—no drywall cutting, no professional help needed. With just a few tools and some patience, you’ll have a sleek, wire-free entertainment area.
Why Hiding Wires Behind a Baseboard Works
Baseboards are the perfect cover for TV wires. They run along the floor, blending seamlessly into your room while keeping cables out of sight. Plus, this method is:
- Non-invasive (no drilling into walls)
- Reversible (no permanent changes)
- Budget-friendly (cheaper than in-wall solutions)
If you’re renting or just want a quick fix, this is the way to go.
What You’ll Need
Before you start, grab these tools:
Before we start, grab these:
- Pry bar or putty knife (to remove the baseboard)
- Measuring tape (accuracy matters)
- Fish tape or wire puller (to guide wires through)
- Drill & spade bit (to make small holes for the wires)
- Cable raceway or wire conduit (optional, but recommended)
- Painter’s tape (for marking)
- Screws or adhesive (to reattach the baseboard)
Got everything? Let’s do this.
Step-by-Step Guide
1. Measure Everything
You need to know how far your TV is from the power source and any other devices (like a soundbar or gaming console).
Use a measuring tape to get the exact length of wire you need to hide.
2. Choose Your Path
Decide the best route for the cables.
Usually, the best option is along the existing baseboard. Look at where your TV is and where the outlet is.
The goal: A clean, direct path.
Mark where the baseboard will come off and where the wires will enter/exit.
Pro tip: Keep the wire path as straight as possible to avoid snags later.
3. Prep the Baseboard
Remove the Baseboard Carefully
Take your pry bar or putty knife and gently lift the baseboard. Be careful—you don’t want to break it.
- Use a putty knife to gently pry it away from the wall.
- Start at one end and work slowly to avoid breaking it.
- If nailed in, wiggle it free instead of forcing it.
Once it’s loose, pull it away from the wall.
If there’s caulk or paint buildup, run a utility knife along the edge before prying it off.
4. Drill Entry & Exit Holes
Time to make some holes.
• At the starting point (TV area), drill a small hole behind the baseboard.
• At the exit point (near the outlet), drill another hole.
Pro Tip: Keep these as low as possible so they stay hidden once the baseboard is back in place.
5. Run the Wires
Now, grab your fish tape or wire puller.
• Feed it through the first hole.
• Guide it along the gap behind the baseboard.
• Pull the wires through to the exit hole.
If the space behind the baseboard is tight, use a cable raceway or conduit to protect the wires.
6. Put Everything Back
You’re in the home stretch.
Reattach the Baseboard
Carefully place the baseboard back in position.
• If nailed originally, use finishing nails to secure it.
• If glued, reapply adhesive.
Touch up any gaps with caulk.
Bonus: Keep It Extra Clean
Want it even cleaner?
Try these:
• Cord covers – Great for extra wire protection.
• Cable management clips – Keep things from shifting.
• Wireless options – Fewer wires, less hassle.
7. Paint and Finish
For a seamless look, touch up any exposed areas with paint that matches your baseboard.
And just like that—you’re done.
No more ugly wires.
8. Test Everything Before Finalizing
Plug in your TV and check all connections.
Ensure no wires are pinched when reinstalling the baseboard.
FAQs
Q: Can I do this without removing the baseboard?
Yes, but it’s trickier. You’d need a flexible drill bit to create a hidden channel behind the board.
Q: Will this work for all baseboards?
Mostly, yes. But if your baseboard is flush against the wall with no space behind, you’ll need to carve out a small groove.
Q: What if I have a rental?
Use adhesive-backed cord covers instead. They’re removable and don’t damage walls.
Final Thoughts
Hiding TV wires behind a baseboard is a simple, affordable fix for a cleaner setup. This is one of the easiest ways to clean up your space No drilling, no mess—just a polished, professional look in under an hour. Now that you know how to hide TV wires behind a baseboard like a pro.
It’s simple, effective, and keeps your space looking crisp. Try it out. Your walls (and your eyes) will thank you.
In conclusion, with these steps, hiding wires behind a baseboard is simple, effective, and totally DIY-friendly.
Remember to measure, plan your route, and secure the cables.
In under an hour, you can go from messy wires to a sleek, professional look.
Try it out and take your living space to the next level.
Home Wiring Pro offers online resources and guides for homeowners looking to enhance their homes through TV wall mounting, installation of home speaker systems, and home automation. Learn the most effective techniques for wiring your projects. For more information about our services visit our social post on Facebook, or Instagram
